View STP12NM50N_4155249.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

STB12NM50N - STD12NM50N STF12NM50N - STP12NM50N
N-channel 500V - 0.29 - 11A - TO-220 /FP- D2PAK - DPAK Second generation MDmeshTM Power MOSFET
General features
Type STB12NM50N STD12NM50N STF12NM50N STP12NM50N

VDSS (@Tjmax) 550V 550V 550V 550V
RDS(on) <0.38 <0.38 <0.38 <0.38
ID 11A 11A 11A (1) 11A
3 1
1 3 2
3 1
DPAK
TO-220
100% avalanche tested Low input capacitance and gate charge Low gate input resistancel
DPAK
3 1 2
TO-220FP
Description
This series of devices is realized with the second generation of MDmeshTM technology. This revolutionary Power MOSFET associates a new vertical structure to the company's strip layout to yield one of the world's lowest on-resistance and gate charge. It is therefore suitable for the most demanding high efficiency converters
Internal schematic diagram
Applications
Switching application
Order codes
Part number STB12NM50N STD12NM50N STF12NM50N STP12NM50N Marking B12NM50N D12NM50N F12NM50N P12NM50N Package DPAK DPAK TO-220FP TO-220 Packaging Tape & reel Tape & reel Tube Tube
November 2006
Rev 7
1/18
www.st.com 18
Contents
STB12NM50N - STD12NM50N - STF12NM50N - STP12NM50N
Contents
1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) ............................ 6
3 4 5 6
Test circuit
................................................ 9
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2/18
STB12NM50N - STD12NM50N - STF12NM50N - STP12NM50N
Electrical ratings
1
Electrical ratings
Table 1.
Symbol VDS VGS ID ID IDM(2) PTOT dv/dt(3) VISO TJ Tstg
Absolute maximum ratings
Value Parameter TO-220-D/DPAK Drain-source voltage (VGS = 0) Gate-source voltage Drain current (continuous) at TC = 25C Drain current (continuous) at TC=100C Drain current (pulsed) Total dissipation at TC = 25C Derating factor Peak diode recovery voltage slope Insulation withstand voltage (RMS) from all three leads to external heat sink (t=1s;TC=25C) Operating junction temperature Storage temperature -11 6.7 44 100 0.8 15 2500 500 25 11(1) 6.7(1) 44 (1) 25 0.2 TO-220FP V V A A A W W/C V/ns V Unit
-55 to 150
C
1. Limited only by maximum temperature allowed 2. Pulse width limited by safe operating area 3. ISD 11A, di/dt 400A/s, VDD =80%V(BR)DSS
Table 2.
Symbol
Thermal data
Value Parameter TO-220 DPAK Unit DPAK TO-220FP 5 100 300 62.5 C/W C/W C
Rthj-case Rthj-a Tl
Thermal resistance junction-case max Thermal resistance junction-ambient max Maximum lead temperature for soldering purpose 62.5
1.25
Table 3.
Symbol IAS EAS
Avalanche characteristics
Parameter Avalanche current, repetitive or not-repetitive (pulse width limited by Tj Max) Single pulse avalanche energy (starting Tj=25C, Id=Ias, Vdd=50V) Value 5 350 Unit A mJ
3/18
Electrical characteristics
STB12NM50N - STD12NM50N - STF12NM50N - STP12NM50N
2
Electrical characteristics
(TCASE=25C unless otherwise specified) Table 4.
Symbol V(BR)DSS dv/dt(1) IDSS IGSS VGS(th) RDS(on)
On/off states
Parameter Drain-source breakdown voltage Test conditions ID = 1mA, VGS= 0 Min 500 44 1 10 100 2 3 0.29 4 0.38 Typ. Max Unit V V/ns A A nA V
Peak diode recovery voltage Vdd=400V, Id=11A, slope Vgs=10V Zero gate voltage drain current (VGS = 0) Gate body leakage current (VDS = 0) Gate threshold voltage Static drain-source on resistance VDS = Max rating, VDS = Max rating @125C VGS = 20V VDS= VGS, ID = 250A VGS= 10V, ID= 5.5A
1. Characteristic value at turn off inductive load
Table 5.
Symbol gfs (1) Ciss Coss Crss
Dynamic
Parameter Forward transconductance Input capacitance Output capacitance Reverse transfer capacitance Test conditions VDS =15V, ID = 5.5A VDS =25V, f=1 MHz, VGS=0 Min Typ. 8 880 230 30 130 30 6 15 Max Unit S pF pF pF pF nC nC nC
Coss eq(2). Equivalent output capacitance Qg Qgs Qgd Rg Total gate charge Gate-source charge Gate-drain charge
VGS=0, VDS =0V to 400V VDD=400V, ID = 11A VGS =10V (see Figure 9) f=1MHz Gate DC Bias=0 test signal level=20mV open drain
Gate input resistance
4.5
1. Pulsed: pulse duration=300s, duty cycle 1.5% 2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS inceases from 0 to 80% VDSS
4/18
STB12NM50N - STD12NM50N - STF12NM50N - STP12NM50N
Electrical characteristics
Table 6.
Symbol td(on) tr td(off) tf
Switching times
Parameter Turn-on delay time Rise time Turn-off delay time Fall time Test conditions VDD=250 V, ID= 5.5A, RG=4.7, VGS=10V (see Figure 15) Min Typ. 15 15 60 14 Max Unit ns ns ns ns
Table 7.
Symbol ISD ISDM(1) VSD(2) trr Qrr IRRM trr Qrr IRRM
Source drain diode
Parameter Source-drain current Source-drain current (pulsed) Forward on voltage Reverse recovery time Reverse recovery charge Reverse recovery current Reverse recovery time Reverse recovery charge Reverse recovery current ISD=11A, VGS=0 ISD=11A, di/dt = 100A/s, VDD=100V, Tj=25C ISD=11A, di/dt = 100A/s, VDD=100V, Tj=150C 340 3.5 20 420 4 20 Test conditions Min Typ. Max 11 44 1.3 Unit A A V ns C A ns C A
1. Pulse width limited by safe operating area 2. Pulsed: pulse duration=300s, duty cycle 1.5%
5/18
Electrical characteristics
STB12NM50N - STD12NM50N - STF12NM50N - STP12NM50N
2.1
Figure 1.
Electrical characteristics (curves)
Safe operating area for TO-220/ DPAK/ DPAK Figure 2. Thermal impedance for TO-220/ DPAK/ DPAK
Figure 3.
Safe operating area for TO-220FP
Figure 4.
Thermal impedance for TO-220FP
Figure 5.
Output characterisics
Figure 6.
Transfer characteristics
6/18
STB12NM50N - STD12NM50N - STF12NM50N - STP12NM50N Figure 7. Transconductance Figure 8.
Electrical characteristics Static drain-source on resistance
Figure 9.
Gate charge vs gate-source voltage Figure 10. Capacitance variations
Figure 11. Normalized gate threshold voltage vs temperature
Figure 12. Normalized on resistance vs temperature
7/18
Electrical characteristics
STB12NM50N - STD12NM50N - STF12NM50N - STP12NM50N Figure 14. Normalized BVDSS vs temperature
Figure 13. Source-drain diode forward characteristics
8/18
STB12NM50N - STD12NM50N - STF12NM50N - STP12NM50N
Test circuit
3
Test circuit
Figure 16. Gate charge test circuit
Figure 15. Switching times test circuit for resistive load
Figure 17. Test circuit for inductive load Figure 18. Unclamped Inductive load test switching and diode recovery times circuit
Figure 19. Unclamped inductive waveform
Figure 20. Switching time waveform
9/18
Package mechanical data
STB12NM50N - STD12NM50N - STF12NM50N - STP12NM50N
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
10/18
STB12NM50N - STD12NM50N - STF12NM50N - STP12NM50N
Package mechanical data
TO-220 MECHANICAL DATA
DIM. A b b1 c D E e e1 F H1 J1 L L1 L20 L30 mm. MIN. 4.40 0.61 1.15 0.49 15.25 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 TYP MAX. 4.60 0.88 1.70 0.70 15.75 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 MIN. 0.173 0.024 0.045 0.019 0.60 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 0.645 1.137 0.151 0.116 inch TYP. MAX. 0.181 0.034 0.066 0.027 0.620 0.409 0.106 0.202 0.052 0.256 0.107 0.551 0.154
oP
Q
11/18
Package mechanical data
STB12NM50N - STD12NM50N - STF12NM50N - STP12NM50N
D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA
mm. DIM. MIN. A A1 A2 B B2 C C2 D D1 E E1 G L L2 L3 M R V2 0 4.88 15 1.27 1.4 2.4 0.4 4 10 8.5 5.28 15.85 1.4 1.75 3.2 0.192 0.590 0.050 0.055 0.094 0.015 4.4 2.49 0.03 0.7 1.14 0.45 1.23 8.95 8 10.4 0.393 0.334 0.208 0.625 0.055 0.068 0.126 TYP MAX. 4.6 2.69 0.23 0.93 1.7 0.6 1.36 9.35 MIN. 0.173 0.098 0.001 0.027 0.044 0.017 0.048 0.352 0.315 TYP. MAX. 0.181 0.106 0.009 0.036 0.067 0.023 0.053 0.368 inch
3
1
12/18
STB12NM50N - STD12NM50N - STF12NM50N - STP12NM50N
Package mechanical data
TO-252 (DPAK) MECHANICAL DATA
mm MIN. A A1 A2 B B2 C C2 D E G H L2 L4 V2 0.60 0o 2.20 0.90 0.03 0.64 5.20 0.45 0.48 6.00 6.40 4.40 9.35 0.8 1.00 8o 0.024 0o TYP. MAX. 2.40 1.10 0.23 0.90 5.40 0.60 0.60 6.20 6.60 4.60 10.10 MIN. 0.087 0.035 0.001 0.025 0.204 0.018 0.019 0.236 0.252 0.173 0.368 0.031 0.039 0o inch TYP. MAX. 0.094 0.043 0.009 0.035 0.213 0.024 0.024 0.244 0.260 0.181 0.398
DIM.
P032P_B
13/18
Package mechanical data
STB12NM50N - STD12NM50N - STF12NM50N - STP12NM50N
TO-220FP MECHANICAL DATA
mm. MIN. 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 16 28.6 9.8 2.9 15.9 9 3 30.6 10.6 3.6 16.4 9.3 3.2 1.126 .0385 0.114 0.626 0.354 0.118 TYP MAX. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 MIN. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409
DIM. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 O
A
B
L3 L6 L7
F1 F
D
G1 H
F2
L2 L5
E
123
L4
14/18
G
STB12NM50N - STD12NM50N - STF12NM50N - STP12NM50N
Packaging mechanical data
5
Packaging mechanical data
DPAK FOOTPRINT
All dimensions are in millimeters
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM. A B C D G N T 1.5 12.8 20.2 16.4 50 22.4 18.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0.795 0.645 0.724 1.968 0.881 BULK QTY 2500 inch MIN. MAX. 12.992
TAPE MECHANICAL DATA
DIM. A0 B0 B1 D D1 E F K0 P0 P1 P2 R
W
BASE QTY 2500
mm MIN. 6.8 10.4 1.5 1.5 1.65 7.4 2.55 3.9 7.9 1.9 40
15.7 16.3
inch MIN. MAX. 7 0.267 0.275 0.409 0.417 0.476 0.059 0.063 0.059 0.065 0.073 0.291 0.299 0.100 0.108 0.153 0.161 0.311 0.319 0.075 0.082 1.574
0.618 0.641
MAX. 10.6 12.1 1.6 1.85 7.6 2.75 4.1 8.1 2.1
15/18
Packaging mechanical data
STB12NM50N - STD12NM50N - STF12NM50N - STP12NM50N
D2PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0795 0.960 1.039 3.937 1.197 BULK QTY 1000 inch MIN. MAX. 12.992
TAPE MECHANICAL DATA
DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MIN. 10.5 15.7 1.5 1.59 1.65 11.4 4.8 3.9 11.9 1.9 50 0.25 23.7 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5.0 4.1 12.1 2.1 inch MIN. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956
BASE QTY 1000
* on sales type
16/18
STB12NM50N - STD12NM50N - STF12NM50N - STP12NM50N
Revision history
6
Revision history
Table 8.
Date 24-May-2005 10-Jun-2005 28-Sep-2005 14-Oct-2005 06-Mar-2006 29-Mar-2006 14-Nov-2006
Revision history
Revision 1 2 3 4 5 6 7 First Release Inserted new row in Table 6.: Switching times Complete version Modified Figure 5, Figure 8 New Stylesheet Modified value on Table 4. New template Changes
17/18
STB12NM50N - STD12NM50N - STF12NM50N - STP12NM50N
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
18/18

▲Up To Search▲

Price & Availability of STP12NM50N

	To Download STP12NM50N Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .